Aluminium and Aluminium Alloys

Aluminium is a light metal; its density is approximately a third of the density of steel.Pure aluminium forms a thin oxide layer when it comes into contact with oxygen which results in a mat, dull appearance.By adding alloying agents, e.g. magnesium, silicon, copper and other metals, the mechanical properties can be changed, e.g. for improving the properties for drilling, turning and milling (AW-Al Cu4PbMgMn) or increasing the strength (e.g. for AW-Al Si1MgMn).

Click icons to view dimensions for other profiles

Aluminium U-section bars according EN 755 (extruded)

AW-Al SiMg (A) (Al Mg Si 0,5)

AW-6060 (3.3206) condition T6 (solution annealed und artificially aged)manufacturing length ca. 6 m

Height 1 (mm) Width (mm) Height 2 (mm) Wall thickness (mm) kg/m
10 10 10 2,0 0,14
12 12 12 2,0 0,17
12 14 12 2,0 0,18
15 15 15 2,0 0,22
20 20 20 2,0 0,30
40 20 40 2,0 0,52
40 20 40 2,5 0,64
25 25 25 2,0 0,38
25 25 25 3,0 0,56
15 30 15 3,0 0,44
20 30 20 2,0 0,36
20 30 20 3,0 0,52
30 30 30 2,0 0,46
30 30 30 3,0 0,68
35 35 35 3,0 0,80
20 40 20 2,0 0,41
20 40 20 2,5 0,51
20 40 20 4,0 0,78
30 40 30 3,0 0,76
40 40 40 2,5 0,78
40 40 40 3,0 0,92
40 40 40 4,0 1,21
30 50 30 3,0 0,84
40 50 40 4,0 1,32
50 50 50 4,0 1,53
50 50 50 5,0 1,89
30 60 30 4,0 1,21
40 60 40 2,5 0,91
40 60 40 4,0 1,43
40 60 40 5,0 1,76
50 60 50 3,0 1,25
60 60 60 4,0 1,86
25 65 25 2,5 0,74
55 65 55 2,5 1,15
30 80 30 3,0 1,09
40 80 40 3,0 1,25
40 80 40 4,0 1,64
40 80 40 5,0 2,03
40 86 40 3,0 1,30
40 100 40 3,0 1,41
50 100 50 5,0 2,57
40 106 40 3,0 1,46
50 150 50 10,0 6,21
80 160 80 10,0 8,10
 
All weights are calculated theoretically and are without obligation.
Other dimensions on demand.