## Aluminium L-section bars according EN 755 (extruded)

### AW-Al SiMg (A) (Al Mg Si 0,5)

AW-6060 (3.3206) condition T66 (solution annealed und artificially aged)manufacturing length ca. 6 m

Height (mm) | Width (mm) | Wall thickness (mm) | kg/m | Height (mm) | Width (mm) | Wall thickness (mm) | kg/m | |||||

10 | x | 10 | x | 2,0 | 0,10 | 40 | x | 40 | x | 3,0 | 0,62 | |

15 | x | 10 | x | 2,0 | 0,12 | 40 | x | 40 | x | 4,0 | 0,82 | |

15 | x | 15 | x | 2,0 | 0,15 | 40 | x | 40 | x | 5,0 | 1,01 | |

15 | x | 15 | x | 3,0 | 0,22 | 45 | x | 30 | x | 3,0 | 0,58 | |

20 | x | 10 | x | 2,0 | 0,15 | 50 | x | 20 | x | 2,0 | 0,37 | |

20 | x | 15 | x | 2,0 | 0,18 | 50 | x | 20 | x | 3,0 | 0,54 | |

20 | x | 15 | x | 3,0 | 0,26 | 50 | x | 20 | x | 4,0 | 0,71 | |

20 | x | 20 | x | 2,0 | 0,21 | 50 | x | 30 | x | 3,0 | 0,62 | |

20 | x | 20 | x | 3,0 | 0,30 | 50 | x | 30 | x | 5,0 | 1,01 | |

25 | x | 15 | x | 2,0 | 0,21 | 50 | x | 50 | x | 3,0 | 0,79 | |

25 | x | 15 | x | 3,0 | 0,30 | 50 | x | 50 | x | 4,0 | 1,04 | |

25 | x | 25 | x | 2,0 | 0,26 | 50 | x | 50 | x | 5,0 | 1,28 | |

25 | x | 25 | x | 3,0 | 0,38 | 50 | x | 50 | x | 6,0 | 1,52 | |

25 | x | 25 | x | 4,0 | 0,50 | 60 | x | 20 | x | 2,0 | 0,42 | |

30 | x | 10 | x | 1,5 | 0,16 | 60 | x | 20 | x | 3,0 | 0,62 | |

30 | x | 15 | x | 2,0 | 0,23 | 60 | x | 30 | x | 3,0 | 0,70 | |

30 | x | 15 | x | 3,0 | 0,34 | 60 | x | 40 | x | 3,0 | 0,79 | |

30 | x | 20 | x | 2,0 | 0,26 | 60 | x | 40 | x | 5,0 | 1,28 | |

30 | x | 20 | x | 3,0 | 0,38 | 60 | x | 60 | x | 3,0 | 0,95 | |

30 | x | 30 | x | 2,0 | 0,31 | 60 | x | 60 | x | 4,0 | 1,25 | |

30 | x | 30 | x | 3,0 | 0,46 | 60 | x | 60 | x | 5,0 | 1,55 | |

30 | x | 30 | x | 4,0 | 0,60 | 60 | x | 60 | x | 6,0 | 1,85 | |

30 | x | 30 | x | 5,0 | 0,74 | 60 | x | 60 | x | 8,0 | 2,42 | |

35 | x | 20 | x | 3,0 | 0,42 | 70 | x | 20 | x | 2,0 | 0,48 | |

35 | x | 35 | x | 3,0 | 0,54 | 70 | x | 25 | x | 2,5 | 0,62 | |

35 | x | 35 | x | 4,0 | 0,71 | 70 | x | 30 | x | 2,0 | 0,53 | |

35 | x | 35 | x | 5,0 | 0,88 | 80 | x | 20 | x | 2,0 | 0,53 | |

40 | x | 10 | x | 2,0 | 0,26 | 80 | x | 40 | x | 3,0 | 0,95 | |

40 | x | 15 | x | 2,0 | 0,29 | 80 | x | 40 | x | 6,0 | 1,85 | |

40 | x | 20 | x | 2,0 | 0,31 | 80 | x | 80 | x | 8,0 | 3,28 | |

40 | x | 20 | x | 3,0 | 0,46 | 100 | x | 30 | x | 3,0 | 1,03 | |

40 | x | 20 | x | 4,0 | 0,60 | 100 | x | 50 | x | 5,0 | 1,96 | |

40 | x | 25 | x | 3,0 | 0,50 | 100 | x | 50 | x | 10,0 | 3,78 | |

40 | x | 30 | x | 3,0 | 0,54 | 120 | x | 60 | x | 6,0 | 2,82 | |

40 | x | 40 | x | 2,0 | 0,42 | |||||||

All weights are calculated theoretically and are without obligation. |